Image
Leica DISTO Family : X6 P2P, X6, D5, X3, D2, E700i (D110), D1

Compare DISTOs


Scroll down to compare DISTOs by feature set:

Use Table Hover Style
Off

D1


Use Table Hover Style
Off

$114

SHOP D1

Use Table Hover Style
Off

simple disto measurement

Press the On/Dist button once to take a simple measurement. The DISTO will beep once when you capture your measurement.

For a continuous measurement, press and hold the On/Dist button for 3 seconds. The DISTO will start beeping to indicate that it is in Continuous Measurement mode. As you move closer or farther away from your target, the measurement display will show the distance increase or decrease in real time. Press the On/Dist button again to capture your final measurement. 

Disto Plan App

Connect to your phone, tablet, or computer with Bluetooth.

Send measurements to compatible apps like our own DISTO Plan App (pictured above) or drop measurements at the cursor in a spreadsheet.

Certified specialist apps for everyone from cabinet makers to real estate appraisers are available.

The Ingress Protection (IP) rating is the protection level against dust and water. The first number indicates dust, and the second indicates water. An IP54 device is rated to be protected against all dust contact (5) and protected against splashing water (4).

E7100i


Use Table Hover Style
Off

$170

SHOP E7100i

Use Table Hover Style
Off

Area

In area mode, the DISTO determines the area of a rectangular or square space in two measurements.

simple disto measurement

Press the On/Dist button once to take a simple measurement. The DISTO will beep once when you capture your measurement.

For a continuous measurement, press and hold the On/Dist button for 3 seconds. The DISTO will start beeping to indicate that it is in Continuous Measurement mode. As you move closer or farther away from your target, the measurement display will show the distance increase or decrease in real time. Press the On/Dist button again to capture your final measurement. 

Disto Plan App

Connect to your phone, tablet, or computer with Bluetooth.

Send measurements to compatible apps like our own DISTO Plan App (pictured above) or drop measurements at the cursor in a spreadsheet.

Certified specialist apps for everyone from cabinet makers to real estate appraisers are available.

The Ingress Protection (IP) rating is the protection level against dust and water. The first number indicates dust, and the second indicates water. An IP54 device is rated to be protected against all dust contact (5) and protected against splashing water (4).

D2


Use Table Hover Style
Off

$220

SHOP D2

Use Table Hover Style
Off

The Multi-functional endpiece folds out from the back of the DISTO and automatically sets the measuring point to either the rear of the DISTO or the tip of the extended endpiece.

This DISTO-exclusive feature ensures that the DISTO is measuring precisely from an outside corner (a very common use case). When fully extended, it is possible to measure from the back of openings as narrow as 20mm. Combined with Min/Max mode, there is no better method for determining the precise corner-to-corner measurement of a rough opening when installing windows or doors. 

In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

DISTO Painter Function

Take the guesswork out of buying paint or any wall covering.

The Painter Function walks you through the steps of combining multiple wall area measurements to determine the total surface area of all the walls in a room.

It's not always as simple as taking one shot to get the measurement you need. Sometimes you need to add multiple shots together, or subtract a negative space from a measurement. As you use the Add/Subtract function, the final result is displayed on the main line and the last measurement taken is shown above.

Volume

In area mode, the DISTO determines the area of a rectangular or square space in two measurements. Volume mode adds a third vertical measurement to calculate the volume of a space.

simple disto measurement

Press the On/Dist button once to take a simple measurement. The DISTO will beep once when you capture your measurement.

For a continuous measurement, press and hold the On/Dist button for 3 seconds. The DISTO will start beeping to indicate that it is in Continuous Measurement mode. As you move closer or farther away from your target, the measurement display will show the distance increase or decrease in real time. Press the On/Dist button again to capture your final measurement. 

Disto Plan App

Connect to your phone, tablet, or computer with Bluetooth.

Send measurements to compatible apps like our own DISTO Plan App (pictured above) or drop measurements at the cursor in a spreadsheet.

Certified specialist apps for everyone from cabinet makers to real estate appraisers are available.

The Ingress Protection (IP) rating is the protection level against dust and water. The first number indicates dust, and the second indicates water. An IP54 device is rated to be protected against all dust contact (5) and protected against splashing water (4).

X3


Use Table Hover Style
Off

$380

SHOP X3

Use Table Hover Style
Off

DISTO Inclination

A highly accurate 360° angle sensor provides the precise angle measurements that are needed for Smart Horizontal measurements, the level function,  height tracking, and measuring sloped objects.

DISTO Smart Horizontal

A laser beam is perfectly straight by definition, making it more accurate than a tape measure. That is also why a laser measurement taken at an angle returns a longer value: An angled line to a plane is longer than a level one. More often than not, this level horizontal distance is the measurement you need.

This fact of geometry can be a problem on active sites where stacks of materials, machinery or other obstacles prevent a level horizontal measurement. The longer the measurement, the greater the error.

In Smart Horizontal mode, DISTOs use the reading from an angle sensor to correct a measurement taken at an angle. The result is an accurate level measurement even if you have to aim over obstacles on the job site.

The display automatically rotates in line with the orientation of the device; allowing you to easily read the screen from any angle.

DISTO Level

The on-board tilt sensor in this DISTO can also be used as a leveling tool.

DISTO Height Profile

This function helps you measure the height differences between 2 or more reference points. Each measurement is stored as a profile pair that references the measurement taken before it.

This function requires a tripod such as our TRI 100.

The Multi-functional endpiece folds out from the back of the DISTO and automatically sets the measuring point to either the rear of the DISTO or the tip of the extended endpiece.

This DISTO-exclusive feature ensures that the DISTO is measuring precisely from an outside corner (a very common use case). When fully extended, it is possible to measure from the back of openings as narrow as 20mm. Combined with Min/Max mode, there is no better method for determining the precise corner-to-corner measurement of a rough opening when installing windows or doors. 

In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

DISTO Painter Function

Take the guesswork out of buying paint or any wall covering.

The Painter Function walks you through the steps of combining multiple wall area measurements to determine the total surface area of all the walls in a room.

Volume

In area mode, the DISTO determines the area of a rectangular or square space in two measurements. Volume mode adds a third vertical measurement to calculate the volume of a space.

It's not always as simple as taking one shot to get the measurement you need. Sometimes you need to add multiple shots together, or subtract a negative space from a measurement. As you use the Add/Subtract function, the final result is displayed on the main line and the last measurement taken is shown above.

simple disto measurement

Press the On/Dist button once to take a simple measurement. The DISTO will beep once when you capture your measurement.

For a continuous measurement, press and hold the On/Dist button for 3 seconds. The DISTO will start beeping to indicate that it is in Continuous Measurement mode. As you move closer or farther away from your target, the measurement display will show the distance increase or decrease in real time. Press the On/Dist button again to capture your final measurement. 

Disto Plan App

Connect to your phone, tablet, or computer with Bluetooth.

Send measurements to compatible apps like our own DISTO Plan App (pictured above) or drop measurements at the cursor in a spreadsheet.

Certified specialist apps for everyone from cabinet makers to real estate appraisers are available.

DISTO IP65

The Ingress Protection (IP) rating is the protection level against dust and water. The first number indicates dust, and the second indicates water. An IP65 device is rated to be completely dust-tight (6) and protected against jets of water (5).

D5


Use Table Hover Style
Off
Image
Disto-D5-pointfinder-camera

$575

SHOP D5

Use Table Hover Style
Off

DISTO Keyboard Mode

The Leica DISTO can be connected to a computer to send the measured values in the form of a keyboard entry to a predefined form in any program (e.g. Excel).

At max range most DISTO's exceed our ability to see the laser point, which makes it hard to take a measurement. Even at shorter distances in bright, outdoor conditions, it can be difficult to see the laser point. The solution is a 4x zoom Digital Pointfinder camera. Place the crosshairs on your measuring point and measure with confidence.

DISTO Smart Horizontal

A laser beam is perfectly straight by definition, making it more accurate than a tape measure. That is also why a laser measurement taken at an angle returns a longer value: An angled line to a plane is longer than a level one. More often than not, this level horizontal distance is the measurement you need.

This fact of geometry can be a problem on active sites where stacks of materials, machinery or other obstacles prevent a level horizontal measurement. The longer the measurement, the greater the error.

In Smart Horizontal mode, DISTOs use the reading from an angle sensor to correct a measurement taken at an angle. The result is an accurate level measurement even if you have to aim over obstacles on the job site.

DISTO Inclination

A highly accurate 360° angle sensor provides the precise angle measurements that are needed for Smart Horizontal measurements, the level function,  height tracking, and measuring sloped objects.

The display automatically rotates in line with the orientation of the device; allowing you to easily read the screen from any angle.

DISTO Height Profile

This function helps you measure the height differences between 2 or more reference points. Each measurement is stored as a profile pair that references the measurement taken before it.

This function requires a tripod such as our TRI 100.

DISTO Level

The on-board tilt sensor in this DISTO can also be used as a leveling tool.

The Multi-functional endpiece folds out from the back of the DISTO and automatically sets the measuring point to either the rear of the DISTO or the tip of the extended endpiece.

This DISTO-exclusive feature ensures that the DISTO is measuring precisely from an outside corner (a very common use case). When fully extended, it is possible to measure from the back of openings as narrow as 20mm. Combined with Min/Max mode, there is no better method for determining the precise corner-to-corner measurement of a rough opening when installing windows or doors. 

In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

DISTO Painter Function

The 'Painter Function' makes it possible to determine a room's wall surface area by simply taking distance and height measurements.

Volume

In area mode, the DISTO determines the area of a rectangular or square space in two measurements. Volume mode adds a third vertical measurement to calculate the volume of a space.

It's not always as simple as taking one shot to get the measurement you need. Sometimes you need to add multiple shots together, or subtract a negative space from a measurement. As you use the Add/Subtract function, the final result is displayed on the main line and the last measurement taken is shown above.

simple disto measurement

Press the On/Dist button once to take a simple measurement. The DISTO will beep once when you capture your measurement.

For a continuous measurement, press and hold the On/Dist button for 3 seconds. The DISTO will start beeping to indicate that it is in Continuous Measurement mode. As you move closer or farther away from your target, the measurement display will show the distance increase or decrease in real time. Press the On/Dist button again to capture your final measurement. 

Disto Plan App

Connect to your phone, tablet, or computer with Bluetooth.

Send measurements to compatible apps like our own DISTO Plan App (pictured above) or drop measurements at the cursor in a spreadsheet.

Certified specialist apps for everyone from cabinet makers to real estate appraisers are available.

The Ingress Protection (IP) rating is the protection level against dust and water. The first number indicates dust, and the second indicates water. An IP54 device is rated to be protected against all dust contact (5) and protected against splashing water (4).

X6


Use Table Hover Style
Off
Image
X^-WITH-POINTFINDER-CAMERA

$720

SHOP X6

Use Table Hover Style
Off

Point-to-Point (P2P) DISTOs are the only laser distance meters capable of taking measurements from a single, distant point.

This unique capability makes measuring hard-to-reach places easier, more efficient, and safer.

P2P can also be used to capture the measurements of complex shapes for export to CAD.

P2P functionality requires a tripod and a DST 360-X tripod adapter. The full P2P kit is available as a package (see below).

Learn more about P2P Technology

wave  hand in front to trigger measurement

Sometimes, the pressure of pushing the ON/DIST button can cause the laser point to move off your target. At long measurement distances, even a small wobble at the laser emitter causes wide movement of the laser point at the end of the line, potentially ruining a measurement, especially on a small target.

Gesture-Activated Measurements eliminate the need to touch the DISTO: Carefully place the laser dot or crosshairs of the Pointfinder Camera on your target and simply wave a hand in front of the device to briefly interrupt the beam. When the DISTO senses this pulse, it triggers the measurement.

Measure in Picture on DISTO

Measure in Picture (MIP) technology allows you to determine an object's width, height, surface area, or diameter within a picture taken by the pointfinder camera.

CAD

This DISTO can save all captured measurement points as a DXF file. You can then transfer the DXF file into CAD on your computer.

DISTO Keyboard Mode

The Leica DISTO can be connected to a computer to send the measured values in the form of a keyboard entry to a predefined form in any program (e.g. Excel).

At max range most DISTO's exceed our ability to see the laser point, which makes it hard to take a measurement. Even at shorter distances in bright, outdoor conditions, it can be difficult to see the laser point. The solution is a 4x zoom Digital Pointfinder camera. Place the crosshairs on your measuring point and measure with confidence.

DISTO Smart Horizontal

A laser beam is perfectly straight by definition, making it more accurate than a tape measure. That is also why a laser measurement taken at an angle returns a longer value: An angled line to a plane is longer than a level one. More often than not, this level horizontal distance is the measurement you need.

This fact of geometry can be a problem on active sites where stacks of materials, machinery or other obstacles prevent a level horizontal measurement. The longer the measurement, the greater the error.

In Smart Horizontal mode, DISTOs use the reading from an angle sensor to correct a measurement taken at an angle. The result is an accurate level measurement even if you have to aim over obstacles on the job site.

DISTO Inclination

A highly accurate 360° angle sensor provides the precise angle measurements that are needed for Smart Horizontal measurements, the level function,  height tracking, and measuring sloped objects.

The display automatically rotates in line with the orientation of the device; allowing you to easily read the screen from any angle.

DISTO Height Profile

This function helps you measure the height differences between 2 or more reference points. Each measurement is stored as a profile pair that references the measurement taken before it.

This function requires a tripod such as our TRI 100.

DISTO Level

The on-board tilt sensor in this DISTO can also be used as a leveling tool.

The Multi-functional endpiece folds out from the back of the DISTO and automatically sets the measuring point to either the rear of the DISTO or the tip of the extended endpiece.

This DISTO-exclusive feature ensures that the DISTO is measuring precisely from an outside corner (a very common use case). When fully extended, it is possible to measure from the back of openings as narrow as 20mm. Combined with Min/Max mode, there is no better method for determining the precise corner-to-corner measurement of a rough opening when installing windows or doors. 

In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

DISTO Painter Function

Take the guesswork out of buying paint or any wall covering.

The Painter Function walks you through the steps of combining multiple wall area measurements to determine the total surface area of all the walls in a room.

Volume

In area mode, the DISTO determines the area of a rectangular or square space in two measurements. Volume mode adds a third vertical measurement to calculate the volume of a space.

It's not always as simple as taking one shot to get the measurement you need. Sometimes you need to add multiple shots together, or subtract a negative space from a measurement. As you use the Add/Subtract function, the final result is displayed on the main line and the last measurement taken is shown above.

simple disto measurement

Press the On/Dist button once to take a simple measurement. The DISTO will beep once when you capture your measurement.

For a continuous measurement, press and hold the On/Dist button for 3 seconds. The DISTO will start beeping to indicate that it is in Continuous Measurement mode. As you move closer or farther away from your target, the measurement display will show the distance increase or decrease in real time. Press the On/Dist button again to capture your final measurement. 

Disto Plan App

Connect to your phone, tablet, or computer with Bluetooth.

Send measurements to compatible apps like our own DISTO Plan App (pictured above) or drop measurements at the cursor in a spreadsheet.

Certified specialist apps for everyone from cabinet makers to real estate appraisers are available.

DISTO IP65

The Ingress Protection (IP) rating is the protection level against dust and water. The first number indicates dust, and the second indicates water. An IP65 device is rated to be completely dust-tight (6) and protected against jets of water (5).

X6 + DST 360-X


Use Table Hover Style
Off
Image
Leica Disto X6 with DST

$1,680

SHOP X6 P2P Kit

Use Table Hover Style
Off

The DST 360-X adapter unlocks the Point-to-Point (P2P) measurement capability of the X6 DISTO.

The X6 connects to angle and height sensors housed in the DST 360-X. In P2P mode, the X6 combines height and angle data from the DST 360-X with its own laser distance and tilt sensor measurements to solve for the tie distance between two remote points. 

This makes it possible to measure hard-to-reach locations from a stationary point up to 250 meters away.

P2P measurements can be linked together to measure the area of complex shapes and the X6 exports these measurements to CAD in DXF format.

Learn more about Point-to-Point Measuring

Leica DISTO S910 P2P Leica DISTO S910 P2P
Use Table Hover Style
Off

COMPARISON TABLE

               
  Leica DISTO X6 P2P package Leica Disto X6 Leica DISTO D5 X3 D2 E7100i D1
 

X6 P2P

X6

D5

X3

D2

E7100i

D1

Accuracy / Range 1 mm/0.04" • 820' 1 mm/0.04" • 820' 1mm/0.04" • 656' 1 mm/0.04" • 500' 1.5mm/0.06" • 100m/330' 1.5mm/0.06" • 60m/200' 2mm/0.08" • 40m/130'
Bluetooth® V5.0 Technology V5.0 Technology V5.0 Technology V4.0 Smart V4.0 Smart V4.0 Smart V4.0 Smart
Intelligent Endpiece    
Smart Horizontal      
Digital Pointfinder         
Point-to-Point ✓*          

*The X6 supports P2P measurements with the addition of a DST 360-X tripod adapter, which can be purchased separately.

Use Table Hover Style
Off

COMPARISON TABLE

Use Table Hover Style
Off