Leica DA230 Signal Transmitter
BUY
Questions? Contact Sales
Related Items
QUICK OVERVIEW
A flexible rod used in conjunction with the Signal Transmitter and Locator to trace non-conductive ducts or pipes up to 100mm (4") diameter. Can be
Learn More
QUICK OVERVIEW
Transmitter clamp, used in conjunction with the Signal Transmitter and Locator to trace the route of buried utilities such as Telecom cable, Power
Learn More
QUICK OVERVIEW
To be used in DX Office Shield CalMaster for calibration verification of a single DD220/DD230 locator.
Learn More
In The Box
Leica DA230 1 Watt Signal Transmitter
- Leica DA230 1 Watt Signal Transmitter
- Three Year Warranty
- Li-Ion Battery Pack
- A100 charger
Leica DA230 3 Watt Signal Transmitter
- Leica DA230 3 Watt Signal Transmitter
- Three Year Warranty
- Li-Ion Battery Pack
- A100 charger
Leica DA230, 1 Watt Signal Transmitter
Includes a Li-ion battery and A100 charger, used to apply a trace signal to underground utilities. Features five trace frequencies, 512Hz, 640Hz, 8kHz, 33kHz and 131kHz with a variable power output level up to 1 Watt.Â
Compatible with the Leica Detect DD230, DD130 locator range.
Leica DA220, 3 Watt Signal Transmitter
Includes a Li-ion battery and A100 charger, used to apply a trace signal to underground utilities. Features three trace frequencies, 8kHz 33kHz and 131kHz with a variable power output level up to 3 Watts.
Compatible with the Leica Detect DD220, DD120 locator range.
Leica DA230 1 Watt Signal Transmitter: Article number 850274
Leica DA230 3 Watt Signal Transmitter: Article number 850275
Â
DA series signal transmitters
| Mode | Output |
|---|---|
| Induction | Up to 1 Watt max. |
| Connection mode | Model dependent, up to 1 Watt or 3 Watt, when connected to a buried utility with an impedance of 300 Ohms |
| Operating transmission frequencies | 131.072 (131) kHz 32.768 (33) kHz 8.192 (8) kHz 512 Hz (DA230 series models) 640 Hz DA230 series models) |
| Display panel | LED Indicators: Battery low indicator Connection mode Frequency indicator Power Output indicator |
| Keypad | 4 membrane push buttons |
| Audio | 85 dBA @ 30 cm Induction mode: Pulsed output with a differing rate for each frequency Connection mode: Low - No output: pulsed output, differing rate for each frequency Good Connection output: constant tone, pitch dependent on power output |
| Battery type | 7.4 V Li-Ion pack |
| Typical operating time 3 Watt, 1 Watt | 15 hours at power level 2 connection mode |
| Dimensions | 250 x 206 x 113 mm/9.84 x 8.11 x 4.45 inches |
| Weight (incl. standard accessories and batteries) | 2.38 kg with Li-Ion |
| Temperature | Operating -20°C to +50°C, -4°F to +122°F Storage -40°C to +70°C, -40°F to +158°F |
| Protection against water, dust and sand | Conforms to IP67 lid open or closed |
| Humidity | 95% RH non condensing The effects of condensation are to be effectively counteracted by periodically drying out the product. |
| Approvals | CE, FCC |
Dimensions
Charger
| Description | A100 Lithium Ion Charger | A140 Lithium Ion Charger |
|---|---|---|
| Type | Li-Ion battery charger | Li-Ion battery charger |
| Input voltage | 100 V AC-240 V AC, 50 Hz-60 Hz |
12 V DC |
| Output voltage | 12 V DC | 12 V DC |
| Output current | 3.0 A | 5.0 A |
| Polarity | Shaft: negative, Tip: positive. | Shaft: negative, Tip: positive. |
Battery pack
| Description | D Series Lithium-Ion Battery pack |
|---|---|
| Type | Li-Ion battery pack |
| Input voltage | 12 V DC |
| Input current | 2.5 A |
| Charge time | 5 hours (maximum) at 20°C |
Leica DA230 1 Watt Signal Transmitter - Article number: 850274
Leica DA230 3 Watt Signal Transmitter - Article number: 850275
Â