Connect to your phone, tablet, or computer with Bluetooth.

Send measurements to compatible apps like our own DISTO Plan App (pictured above) or drop measurements at the cursor in a spreadsheet.

Certified specialist apps for everyone from cabinet makers to real estate appraisers are available.

A laser beam is perfectly straight by definition, making it more accurate than a tape measure. That is also why a laser measurement taken at an angle returns a longer value: An angled line to a plane is longer than a level one. More often than not, this level horizontal distance is the measurement you need.

This fact of geometry can be a problem on active sites where stacks of materials, machinery or other obstacles prevent a level horizontal measurement. The longer the measurement, the greater the error.

In Smart Horizontal mode, DISTOs use the reading from an angle sensor to correct a measurement taken at an angle. The result is an accurate level measurement even if you have to aim over obstacles on the job site.

In area mode, the DISTO determines the area of a rectangular or square space in two measurements. Volume mode adds a third vertical measurement to calculate the volume of a space.

In Min/Max mode, you "sweep" the laser point into a corner. The longest measurement is recorded. Very useful for accurate diagonal room or window/door measurements.

It's not always as simple as taking one shot to get the measurement you need. Sometimes you need to add multiple shots together, or subtract a negative space from a measurement. As you use the Add/Subtract function, the final result is displayed on the main line and the last measurement taken is shown above.

The Multi-functional endpiece folds out from the back of the DISTO and automatically sets the measuring point to either the rear of the DISTO or the tip of the extended endpiece.

This DISTO-exclusive feature ensures that the DISTO is measuring precisely from an outside corner (a very common use case). When fully extended, it is possible to measure from the back of openings as narrow as 20mm. Combined with Min/Max mode, there is no better method for determining the precise corner-to-corner measurement of a rough opening when installing windows or doors.